DJ Service
Snabba leveranser
Snabba leveranser
Trygg e-handel
Trygg e-handel
Handla räntefritt
Handla räntefritt
Varukorgen
Favoriter
Radial TRIM TWO Stereo DI with Level Control

Radial - TRIM TWO Stereo DI with Level Control

Artnr: IDS0047868

Leveranstid: 3-10 vardagar.

1739 kr/st

The Radial Trim-Two is loaded with dual 1/4" jacks, left and right RCAs and a stereo 3.5mm input. These are wired in parallel to allow the signal to be split off to feed an alternate signal path such as monitors. Inside, two great sounding Eclipse transformers do the work of isolating and balancing the signal. These 'passive engines' deliver a linear frequency response from 20Hz to 18kHz and are capable of handling up to +15dB signal levels thus providing typical -10dB keyboards and consumer level devices with plenty of headroom. An easy access front panel stereo level control makes adjusting the volume a snap. Play your sound files using the Trim-Two by connecting it from the headphone output of your tablet to the 3.5mm input on the Trim-Two. Use the volume control to adjust the level and avoid distortion.

Isolation and Passive System

Transformers provide galvanic isolation between the source and the destination and are extremely effective at eliminating ground loops. One merely connects the source to the Trim-Two and then the male XLR outputs to the PA system. As the Trim-Two is completely passive, no power is required.

Robust and Durable Construction

Made in Canada from heavy duty 14 gauge steel, the Trim-Two features Radial's unique book-end design that creates protective zones around the connectors and controls. Inside, the unique I-beam frame protects the sensitive inner workings from potential damage that could torque the PC board and cause solder points to prematurely go cold. The steel casing also provides shielding against external magnetic fields.

 

Features

  • Stereo DI Box for Line Level Sources
  • Perfect for Keyboards, DJs and Audio/Visual Presentations
  • Ultra Linear Frequency Response
  • Easy Access Front Panel Volume Control
  • RCA, 1/4 Inch Jack and 3.5mm Connections
  • Robust Steel Housing

Specifications

  • Inputs: 2 x 1/4" Jack, 1 x Stereo RCA, 1 x Stereo 3.5mm
  • Outputs: 2 x Balanced XLR
  • Input Impedance: 10K Ohms (Unbalanced)
  • Output Impedance: 2.8K Ohms (Balanced)
  • Audio Circuit Type: Passive (Transformer Based)
  • Number of Channels: Dual Channel (Stereo)
  • Frequency Response: 20Hz - 20KHz
  • Dynamic Range: >100dB
  • Maximum Input: +20dB @ 20Hz
  • THD: 0.009%
  • Phase Deviation: <10°
  • Transformer: Custom
  • Shield: Copper Foil
  • Input Pad: Variable Level Control
  • Mono Sum: Merges Left + Right Sources to Mono
  • Ground Lift: Disconnects Pin-1 @ Both XLR Outputs
  • XLR Configuration: AES Standard (Pin-2 Hot)
  • Construction: 14 Gauge Steel Chassis & Outer Shell
  • Finish: Durable Powder Coat
  • Height: 127mm / 5"
  • Width: 84mm / 3.3"
  • Depth: 48mm / 2"
  • Weight: 0.7 Kg