DJ Service
Snabba leveranser
Snabba leveranser
Trygg e-handel
Trygg e-handel
Handla räntefritt
Handla räntefritt
Varukorgen
Favoriter
Doepfer A-155 Analog/Trigger Sequencer

Doepfer - A-155 Analog/Trigger Sequencer

Artnr: IDS0064052

Leveranstid: Tillfälligt slut. Klicka för att bevaka »

3403 kr/st

Analog and Trigger Sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches

Features of the analog rows (knobs):

- 8 potentiometers (knobs)
- lower row: Scale (knob), upper row: 1V/2V/4V
(octave range switch for exact VCO control)
- Glide time (knob), same as portamento or slew limiter
- Glide Control (control input for switching glide on/off)
- S/H Control (control input for internal S and H, works like A-148)
- Pre Glide/S and H-Out (analog output before S/H and glide unit, especially required when external audio signals are used as inputs of the lower row)
- Post Glide/S and H-Out (analog output after S/H and glide unit)
- lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators

Features of the trigger rows (switches):

- 4 Trigger/Gate tracks with 2 rows of switches
- toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position)
- 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal)
- 1 gate row (i.e. a high signal is applied during the length of the step set)

Control inputs and buttons:

- Step (defines the tempo of the sequence, same as clock or trigger input)
- Reset (resets all rows to step 1)
- Start (starts the sequence at the momentary position)
- Stop (stops the sequence at the momentary position)

Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI.
The quantizing module A-156 can be used to quantize the infinite analog voltages coming from A-155 into discrete semitone steps (multiples of 1/12V).
Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence.
The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).
technical details

Width: 50HP

Connections:
3x Trigger outputs
1x Gate output
2x Pre outputs
2x Post outputs
2x S&H Ctrl.
2x Glide Ctrl.
8x External CV/Audio inputs
Start input
Stop input
Clock input
Reset input