DJ Service
Snabba leveranser
Snabba leveranser
Trygg e-handel
Trygg e-handel
Handla räntefritt
Handla räntefritt
Varukorgen
Favoriter
Doepfer A-160 Clock/Trigger Divider

Doepfer - A-160 Clock/Trigger Divider

Artnr: IDS0064056

Leveranstid: Tillfälligt slut. Klicka för att bevaka »

737 kr/st

Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses.
The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64.

The low/high levels of the output signals are 0V and about +10V.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length from one to eight events.
technical details

Width: 4HP

Connections:
Trigger input
Reset input
/2 output
/4 output
/8 output
/16 output
/32 output
/64 output