DJ Service
Snabba leveranser
Snabba leveranser
Trygg e-handel
Trygg e-handel
Handla räntefritt
Handla räntefritt
Varukorgen
Favoriter
Doepfer A-112 Vintage Edition

Doepfer - A-112 Vintage Edition

Artnr: IDS0063968

Leveranstid: Tillfälligt slut. Klicka för att bevaka »

1815 kr/st

Module A-112 is the combination of a voltage controlled 8 Bit Sampler and a wavetable oscillator. On top of it the module is able to generate some special effects.


A-112 was designed as an additional sound source with the typical sounds of the early 8 bit samplers and is not comparable with the modern polyphonic MIDI samplers available on the market.


Sampling mode:
- 8 bit audio resolution,

- 128kB memory in 2 banks 64kB each (equivalent to 2 seconds of sampling time for each bank with 32 kHz sampling rate),

- audio input with attenuator,

- overload display in record mode (gate LED),

- possibility of MIDI Dump to store sounds in a computer via MIDI,

- non volatile memory for the 2 samples in the module,

- manual tune control for adjustment of sampling rate for record and play,

- CV input (~ 1V/Oct),

- both manual tune and CV determine the sampling rate respectively the pitch (pitch range is 5 octaves),

- gate input (not a trigger: the sample starts at the positive edge of the gate signal and is played as long as gate is high or until the end of the sample is reached),

- manual Gate button,

- non filtered audio output (thus quantizing noise can be used as an element of the sound intentionally)

 

Wavetable mode:
- special appearance of the sampling mode when playing a sample,

- the audio input is now used as a second control voltage input for moving through the sample in 256 byte wide loops (wavetables).

- To achieve the typical wavetable oscillator sounds the sampling memory must contain corresponding wavetable data (normally loaded via MIDI dump). These data contain a set of wavetables with different harmonic content (e.g. a filter sweep) to get the typical wavetable sound while moving through the tables via CV2. But you may also use a "normal" sample and go through the sample with CV2 to obtain partially amazing sounds never heard before.

- You may use for example sampled speech and go with CV2 through the syllables or speech shreds to get really very extreme sounds.

- An ideal addition for this feature is the Offset/Attentuator module A-183-2 which can be used to adjust the position of the wavetable (Offset) and the modulation depth (Att.).

- As modulation source an LFO (A-145, A-146, A-147, A-143-3), ADSR (A-140, A-141, A-142, A-143-1/2) or a random voltage (A-118, A-149-1) may be used. Even a ribbon controller (A-198 or R2M), the Theremin module A-178, the Joystick A-174 or the Wheels module A-174-2 are useful to drive through the wavetables.

 

Effects:
- Additionally the module offers - in a way free of charge - some effects like delay, reverse delay, pitch shiftinng or freeze.

- But it has to be pointed out that due to the 8 bit audio reolution these effects are not comparable to high quality effect units and should be understand as an extra for nothing. The A-112 is not an effects unit !

The sampling time of the A-112 is about 1...30 seconds corresponding to a sampling frequency range of about 60kHz...2kHz (64kB@60kHz ~ 1 s, 64kB@2kHz ~ 30 s).
technical details

Width: 10HP

Connections:
MIDI input
MIDI output
Gate input
Audio-/Wave CV input
CV input
Audio output