TK Audio BC1 THD

Blend control for parallel compression.
All controls stepped for easy recall.
High Pass filter on the sidechain.
External sidechain input.
Smooth compression.

The BC1-S provides smooth bus compression that applies for both mixing and tracking.
Engineers call it “The Magic Glue” when the BC1-S’ transparent compression strengthens mixes without compromising clarity. The built-in blend control makes it easy to apply parallel compression by adjusting the blend of dry and compressed signal. A switchable sidechain filter can be applied at 150Hz which makes the BC1-S less responsive to low frequency energy. Smooth and transparent compression will never go out of fashion. 

 

Noise floor: below -104dBm
Frequency response: 20Hz to 20kHz less than -0,025dB
Frequency response: 20Hz to 80kHz less than -0,3dB 

Blend control fully CW (dry)
THD+N @ 0dBu: less than 0,0045%
THD @ 0dBu: less than 0,001%
THD+N @ +26dBu: less than 0,02%
THD @ +26dBu: less than 0,02%
Blend control fully CCW (straight)
THD+N @ 0dBu: less than 0,00045%
THD+N @ +26dBu: less than 0,0003%

Input impedance: 40kohm
Output impedance: 50ohm
Max input level: +26dBu
Max output level: +27dBu @ 600ohms load

 
Features: 
Threshold: -20dB to +20dB
Ratio: 1.5:1 / 2:1 / 4:1 / 10:1 / Hard
HP Filter: 150Hz, -6dB octave
External sidechain: in/out
Dual or single sidechain detectors
Attack: UF(ultrafast)/0.1/0.3/0.6/1/3/10/30/60/120mS
Release: 50mS/100mS/300mS/600mS/1.2S/Auto
Gainreduction meter
Make-up: 0 to +20dB
Compression in/out
Straight signal mute
Blendcontrol: from dry to compressed
External sidechain input: unbalanced TRS jacks
Internal, regulated powersupply with a toroidal transformer
115 or 230V, selectable 

Specifications and components may be changed or updated without further notice.